How to use the electronic truck scale correctly

Release time:

2023-10-08

The weighing room of the electronic truck scale shall be equipped with full-time personnel to operate and hold qualification certificates. Weighing personnel should be familiar with the relevant knowledge of electronic truck scale and operate the electronic truck scale correctly. Electronic truck scales should be used during the verification cycle.

How to use the electronic truck scale correctly

1. The weighing room of the electronic truck scale shall be equipped with full-time personnel to operate and hold qualification certificates.

2. Department of scale personnel should be familiar with the relevant knowledge of electronic truck scale, the correct operation of electronic truck scale.

3. The electronic truck scale should be used during the verification period.

4. Before using the electronic truck scale, it should be turned on and preheated for about 30min.

5. Carefully check whether the instruments and parts of the electronic truck scale are normal and in good condition, especially check whether there are sundries stuck on the scale table and other parts.

6. The car should drive straight on the electronic truck scale at a speed lower than 5 km/h and brake gently; the car should stop at the center of the scale of the electronic truck scale as much as possible.

7. After the car is stable, start reading the display reading and record or print.

8. Electronic truck scale is strictly prohibited overload weighing.

9. When not in use after weighing, the electronic truck scale should be turned off and the power supply should be cut off.

Frequently clean the electronic truck scale, especially the items scattered on the scale should be cleaned in time.

11. If the electronic truck scale fails, it should be stopped immediately and reported to a professional for repair. It can only be used after passing the verification.

Key words: