Matters needing attention in the use of electronic truck scale

Release time:

2023-10-08

The electronic truck scale weighing display should not be used in vibration, swaying occasions, direct sunlight and high temperature, dusty and humid places. The AC power supplied to the electronic car balance is reliably grounded to ensure its use. In areas where lightning is frequent, reliable lightning protection devices are set up for the balance of electric vehicles to ensure that people and F stop lightning damage to the instrument.

Matters needing attention in the use of electronic truck scale

Electronic truck scale sensors and instruments are electrostatic equipment, in the process of use to take anti-static measures, it is strictly prohibited on the scale for welding or other strong electric field. Before connecting the instrument and external equipment (sensor, printer, large screen], cut off the power supply of the instrument and corresponding equipment. Water and sundries shall not be injected into the machine to prevent damage to electronic components and electric shock.

1. The electronic car measurement sensor should be placed gently to prevent f from colliding or falling, and stop rushing out during installation, so as not to damage the measurement performance of the electronic car measurement sensor.

2, the installation of electronic truck scale weighing sensor installation surface should be flat, smooth, no oil film, magazines, etc.

3. Each installation jacket of a single electronic truck scale weighing sensor should be adjusted to a horizontal plane as far as possible.

4. When installing, ensure that the load direction of the electronic truck scale weighing sensor is consistent with the specified direction, and try to avoid the additional lateral force, bending moment and torque.

5. Baffles should be set up around the electronic truck scale weighing sensor as much as possible, or the weighing sensor part should be covered with a rubber sleeve to avoid polluting the weighing sensor and its movable parts, which will affect the weighing accuracy.

Key words: