Electronic truck scale maintenance

Release time:

2023-10-08

In order to ensure accurate measurement of the system, avoid wind and rain erosion, and facilitate the operation, it is required to set up work shed and weighing room. There shall be a gap of 10-15mm at the junction of the weighing platform and the guide slope, and there shall be no collision and friction. The weight of the measured truck shall not exceed the rated weight of the system.

1. In order to ensure accurate measurement of the system, avoid wind and rain erosion, and facilitate operation, it is required to set up work shed and measuring scale room.

2. There should be a gap of 10-15mm at the junction of the weighing platform and the guide slope, and there should be no collision and friction.

3. The weight of the measured truck shall not exceed the rated weighing value of the system.

4, in order to ensure the normal measurement of weighing instruments, should be regularly verified.

5. No foreign matter shall be stuck in the lower part of the scale platform.

6. The operators of the scales must be trained to operate. The repairers shall not disassemble any parts at will before mastering the necessary knowledge, so as not to affect the measurement accuracy or damage the system.

7. The operator of the instrument must digest and absorb the instructions of the instrument in detail, master the basic principles, and be familiar with the maintenance methods of the instrument before formal operation and use.

8. Before the system is powered on, it is necessary to check whether the power supply and grounding device are reliable. When the system is stopped from work, the instrument power plug must be unplugged and the power supply must be cut off.

Key words: